CBM-LFP08FL – Lithium LiFePO4 BMS Cell module Universal to suit Cells with M8 bolts

$18.15

CBM-LFP08-FL   (With Fly Lead)

PLEASE NOTE: WE ARE SUFFERING FROM THE GLOBAL COMPONENT SHORTAGE CRISIS. NEW STOCK IN 1Q 2022.

Battery Management cell balancer/monitor module suitable for a LiFePO4 (LFP) cells with M8 bolts and also GBS cells with 2 x 4mm bolts.

The CM-LFP08 is suitable for a range of cell sizes, it has an 8.5mm hole on the negative side and a 3mm hole on the positive side to allow connection of a fly lead to the positive terminal. Note that the fly lead IS supplied with these units.
A fly lead is attached on the positive side to support a range of terminal spacings.
NOTE: This cell module has an bolt hole on negative side suitable suitable for bolting to M8 battery terminals. Most specifically this size of cell module is suitable for Winston/Thundersky LYP90 – 160AHA cells.

Out of stock

SKU: BMS-CBM-LFP08FL Category: Tag:

Description

Features:
– Up to 1000mA shunt balancing current
– EPOXY ENCAPSULATED (the only one on the market!)
– Commences balancing above 3.50V
– Utilizes the unique EV Power one wire current loop interface, simply daisy chain the signal terminals together.
– 2.6V undervoltage, 4.0V over-voltage signalling.
– Reverse Polarity protected
– Overvoltage protection (>4.5V) via internal fuse. Module is permanently disabled.
– The lowest profile of ANY cell top BMS balancer, does not protrude above terminal bolt level.
– Gold plated connections
– operational current < 3mA to prevent battery self discharge (<3mA at 3.2V)
<250uA @ 2.5V
– Designed and manufactured in Australia

Download Datasheet: CBM-LFP-datasheet

Additional information

Weight 0.01 kg
Dimensions 10 × 2 × 1 cm

You may also like…

Related products

Lithium LiFePO4 BMS Cell module to suit GBS LFP40/60/100AH Cells Lithium LiFePO4 BMS Cell module to suit Cells with M12-14 bolts